A very important point in the process of making the packaging box is the printing work, which is the same as that we usually use the printer to print documents. There are many things that need to be paid attention to. Some paper sizes need to be adjusted, and there are many places that need to be paid attention to when printing the box. Let's take a look at some key points of packaging and printing.
1. Generally, the software used in packaging design is DCR, PS, AI and other software, and there are two color modes in this kind of software. For example, the RGB mode we usually use represents the color that shines by itself, but when such a color is printed, we will find that some colors are not available, and some colors will appear a little gray when printed, When designing the packaging box before printing, CMYK mode is usually used. The color of this mode represents the effect of reflected light, but it should also be noted that some color cartridges are not available during printing.
2. Generally speaking, it is necessary to fill in the blanks after the design is completed, because inaccuracies may occur during printing, so there will be a space between two adjacent colors, so this kind of color also needs to be treated. Generally speaking, it is more appropriate to choose the light color when expanding the color.
The above introduction is about some key points in the printing of the packaging box. Generally, it needs to be considered in combination with the design when printing, because sometimes the design is very good-looking, but the above adjustments are not made, so the effect after the actual production and printing is completely different from the expectation.
